Equipment Overview; Part Description - AccuBANKER SWITCH AB7800 User Manual

3. Equipment Overview

3.1 Part Description

2
3
4
5
6
1. Printer: Prints Receipt
2. Bill Guiders: Aligns the bills to be counted
3. Hopper: Bills are placed here to be counted
4. Control Panel: Control operations/Shows counting results
5. Rejection Tray: Rejected bills are deposited here
6. Stacker: Counted bills are collected here
7. Thickness Adjustment knob: Used to adjust the bills' feeding gap.
The opening where bills enter the equipment from the hopper
8. Upper Module Handle: Pulled to access inside upper compartment
9. Sensors Tray Handle: Pulled back to remove the tray
10. SD Card Port: Used for updates/Technical Service
11. RS232 Port (Serial): External Display/ PC connection (ABSuite)
12. USB Port: Used for updates/Technical Service
13. On / Off switch: Power the unit ON or OFF
14. Power Cable Jack: To connect the power cord
1
7
8
9
13 12 11
14
1
9