Table of Contents
Advertisement
Commissioning the device and device functions
4.2 Switching the device on/off
Following the initial startup, the operating system preinstalled on the drive is automatically
configured on the device.
NOTICE
Faulty installation
If you change the default values in the BIOS setup or turn off the device during the
installation, the operating system cannot be installed correctly. The operating safety of the
device and the plant is at risk.
Do not switch off the device during the entire installation process. Do not change the
default values in the BIOS setup.
Procedure - Switching on the device
1. Press the on/off switch.
The "PWR" LED lights up. The device carries out a self-test.
2. Follow the instructions on the screen.
Set the region and language. If you want your system language to be international, select
English. For information on changing the region and language settings, refer to the
section Reinstalling the operating system (Page 46).
Procedure - Switching off the device
To turn off the device, always select the function "Start" > "Shut down".
Additional information
Information on your operating system can be found on the Internet:
• Microsoft® Windows® 10
(https://support.industry.siemens.com/cs/ww/en/view/109749498)
32
Operating Instructions, 09/2021, A5E51366275-AA
SIMATIC IPC327G
Advertisement
Table of Contents
