Measuring Dc Voltage; Measuring Ac Voltage; Measuring Dc Or Ac Current - SATA 03015 User Manual

Measuring DC voltage:

1） Connect the black probe to "
2） Set the function switch to the "
3） Connect the probes to the two ends of the power or circuit to be measured.
4） Take readings on the screen, and the polarity of the end connected to red test probe will also be indicated.
Note:
To avoid electric shock or damage to the meter, do not apply a voltage greater than 1,000V to the input.

Measuring AC voltage:

1） Connect the black probe to "
2） Set the function switch to the "
3） Connect the probes to the two ends of the power or circuit to be measured.
4） Take readings on the screen,
Note:
To avoid electric shock or damage to the meter, do not apply a voltage greater than 100V to the input.

Measuring DC or AC current:

1） Connect the black probe to "
03015: If the absolute value of current to be measured is lower than 400mA, connect the red test probe to "
absolute value of current to be measured is equal to or greater than 400mA （≤ 20A）, connect the red probe to "
03017: If the absolute value of current to be measured is lower than 600mA, connect the red test probe to "
absolute value of current to be measured is equal to or greater than 600mA （≤ 20A）, connect the red probe to "
2） Set the function switch to the desired position "
03015/03017
" jack and the red probe to "
" position.
" jack and the red probe to "
" position.
" jack.
中文
" jack.
" jack.
", " " or " ".
EN DE RU KO PT
" jack. If the
JA ES
" jack. If the
" jack.
" jack.
35