Advertisement
Step by step assembly instructions
Step One
Hook the pre-attached metal fixing on the Side Rails (3) over the pre-inserted bolts in the Headboard (1)
and Footboard (2) and hand-tighten to loosely secure parts together. Do not tighten with M5 Allen Key (B)
until you have inserted the Centre Rail in the next step.
3
Bracket
Side Rail
Step Two
Insert Centre Rail (5) into the brackets in the centre of the Headboard (1) and Footboard (2). Push down
fully and secure in place using M6 x 25mm Bolt (E). Tighten using Allen Key M4 (A). You can now
tighten the bolts at the Side Rails from previous step (Step One) with Allen Key M5 (B) so all
fastenings are now tightened.
3
Bracket
Side Rail
E.
A.
M6 x 25mm
LOOSELY SECURE PARTS
TOGETHER IN ORDER FOR
CENTRE RAIL TO FIT IN
NEXT STEP
1
3
2
Centre Rail
1
M5
2
B.
M4
M5
1
3
AFTER INSERTING CENTRE RAIL,
TIGHTEN ALL FIXINGS FULLY
INCLUDING BOLTS AT SIDE RAILS
FROM STEP ONE
5
3/6
2
1
M6 x 25mm (E)
5
M4 (A)
3
Bracket
Side Rail
1+2
Advertisement
