Table of Contents
Advertisement
BT On-Air 2000 Classic ~ 1st Edition ~ Issue 2 ~ 11th November '02 ~ 5051
To register your BT On-Air 2000 Classic
handset to a base (if you have changed
System code from 0000)
On the handset:-
L
Press the UP or DOWN button until the
M
display shows BASE.
Press the OK button.
C
OK
The display will show REGIST.
Press the OK button.
C
OK
The display will show AUTO.
M
Press the DOWN button until CUSTOM is
displayed.
The available bases will be displayed.
L
Use the UP or DOWN button to select the
M
base you want to register your handset to.
Press the OK button.
C
OK
The display will show CODE?.
The display will show ____ ____ .
CODE
Enter your 4 digit base system code
(once only).
Press the OK button.
C
OK
At the base:-
Press and hold the button on the base until
it starts to flash.
On the handset:-
The display will show 2, 3, 4, 5, 6.
L
Use the UP or DOWN button to select the
M
handset you wish to register.
Press the OK button.
C
OK
The display will show REGIST.
Note
The number you save becomes the handset's name
(ie. 'Handset 1').
All manuals and user guides at all-guides.com
To de-register your BT On-Air 2000
Classic handset from the base
L
Press the UP or DOWN button until the
M
display shows BASE.
Press the OK button.
C
OK
M
Press the DOWN button until the display
shows PARAM.
Press the OK button.
C
OK
Press the 3 button twice.
Enter your base system code (0000 if not
CODE
changed).
All registered handset numbers are
displayed.
Enter the number of the handset you wish
to de-register.
Press the C button to exit.
C
OK
Note
When planning to use a handset with more than
one base, we recommend that you:
• Number each handset (from 1-6).
• Register your handset(s) at base 2
(and 3 & 4 if used) using the same internal
number as at base 1.
When registered to more than one base, the base
unit will automatically allocate itself a number.
8
Advertisement
Table of Contents
