BT On-Air 2000 Classic User Manual page 20

BT On-Air 2000 Classic ~ 1st Edition ~ Issue 2 ~ 11th November '02 ~ 5051
To set the external line access code
L
Press the UP or DOWN button until the
M
display shows BASE.
Press the OK button.
C OK
L
Press the UP or DOWN button until the
M
display shows PARAM.
Press the OK button.
C OK
The display will show F.
Press the 2 button.
2
Press the 4 button.
4
Press the 1 button.
1
Enter the switchboard external line access
code, e.g. 9.
You can enter codes up to 8 digits in length.
C OK
Press OK to confirm,
Press the C button to exit.
C OK
To set the number of digits
L
Press the UP or DOWN button until the
M
display shows BASE.
Press the OK button.
C OK
L
Press the UP or DOWN button until the
M
display shows PARAM.
Press the OK button.
C OK
The display will show F.
Press the 2 button.
2
Press the 4 button.
4
Press the 2 button.
2
Enter the number of digits you dial to make
internal calls to other extensions on your
switchboard.
Press OK to confirm.
C OK
Press the C button to exit.
C OK
19
All manuals and user guides at all-guides.com
Note
For the external line access code to be dialled for
external calls only, it is important that all external
numbers stored in your handset memories contain
more digits than the number of digits required to
make an internal call to other extensions on your
switchboard.
This is most likely to occur when you have local
external numbers stored in the handset memories
without the area code. To overcome potential
problems ensure that all numbers are stored complete
with area code.
To activate and de-activate the external
line access code
L
Press the UP or DOWN button until the
M
display shows BASE.
Press the OK button.
C OK
L
Press the UP or DOWN button until the
M
display shows PARAM.
Press the OK button.
C OK
The display will show F.
Press the 2 button.
2
Press the 4 button.
4
Press the 3 button.
3
L
Use the UP or DOWN button to select 0 to
M
de-activate, or 1 to activate.
Press OK to confirm.
C OK
Press the C button to exit.
C OK