Data Transmission via USB
The USB port on the solo Series Digital Clinical Scale is a bi-directional port that can
receive and transmit data. It can be used to communicate to a computer by pressing the
key, or by transmitting a command from the computer to the scale.
Push in on arrow and
slide USB cover off.
To connect to a computer or other USB device, you will need a USB Type B cable to plug
into the USB port located under the small cover on the back of the display.
Output Format
The format below represents the output directly to a computer for processing of data and
includes commas between each field, and a carriage return to terminate the record.
Time, Date, Mother BMI, Height, Mother Weight, Baby Weight <CR>
12:00,12/01/20,21.5,5'03.0",132.3lb,12.5lb
Remote Print Command
The host device (computer) can send the following command to get data from the scale.
<LF> P <CR>
This command is equivalent to pressing the
Output Format data (described above) to the computer.
DATA TRANSMISSION FORMAT
0044-0391-0M Rev F solo Series Owner's Manual
key. The scale will respond by sending the
27