20210720104559_32MLF6000_eng_BOOK Page 246 Tuesday, July 20 2021 10:54:27 JST
Removing & Installing Body Components
Battery
Negative
terminal
Bolts
Positive terminal
#
Removal
Make sure the ignition switch is in the
(Off) position.
Battery
Rubber strap
Terminal nuts
Remove the front seat.
1.
Unhook the rubber strap.
2.
Disconnect the negative - terminal from
3.
the battery.
Disconnect the positive + terminal from
4.
the battery.
Remove the battery, taking care not to
5.
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 290
2
P. 244
2
P. 86
2
P. 233
2
243