Side Stand - Honda NT1100A 2021 Manual

20210720104559_32MLF6000_eng_BOOK Page 257 Tuesday, July 20 2021 10:54:27 JST

Side Stand

Checking the Side Stand
Side stand spring
Check that the side stand operates
1.
smoothly. If the side stand is stiff or
squeaky, clean the pivot area and
lubricate the pivot bolt with clean grease.
Check the spring for damage or loss of
2.
tension.
254
3.
NT1100A
Sit on the vehicle, shift the transmission to
Neutral, and raise the side stand.
NT1100D
Sit on the vehicle and raise the side stand.
4.
NT1100A
Start the engine, pull the clutch lever in,
and shift the transmission into gear.
NT1100D
Start the engine and press the
of N-D switch to switch the transmission
into D mode.
Lower the side stand all the way. The
5.
engine should stop as you lower the side
stand. If the engine doesn't stop, have
your vehicle inspected by your dealer.
side
D-S