1. Manuals
  2. Brands
  3. JALpower Manuals
  4. UPS
  5. JP5530 Series
  6. User manual

JALpower JP5530 User Manual

Hide thumbs Also See for JP5530:
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S MANUAL
 
 
 
JP5530 1-3KVA
 
 

Advertisement

Table of Contents
loading

Related Manuals for JALpower JP5530

Summary of Contents for JALpower JP5530

  • Page 1 USER’S MANUAL JP5530 1-3KVA          ...

  • Page 2: Table Of Contents

    JP5530 1-3KVA Contents       1.1 Description of Commonly Used Symbols ............ 1  1.2 Safety Notes ...................... 1  2.1 System type and Configuration ............... 2  2.2 UPS Appearance  .................... 3  3.1 Unpacking Inspection .................. 4  3.2 Installation notes .................... 4  3.3 Cable connection  .................... 4  3.4 Connection communication cable  .............. 6 ...

  • Page 3: Description Of Commonly Used Symbols

    JP5530 1-3KVA 1.1 Description of Commonly Used Symbols Some or all of the following symbols may be used in this manual and may appear in your application process. Therefore, all users should read the form carefully and thoroughly. Symbol & Description...

  • Page 4: System Type And Configuration

    There are two types of UPS according to the battery configuration, standard type and long backup time type, each available in the following ratings：1KVA、2KVA and 3KVA. Table2-1 UPS types and configurations UPS type JP5530 series JP5530 RM series With 1A charger and 2pcs With 1A charger and 2pcs 1KVA batteries...

  • Page 5: Ups Appearance

                                                  JP5530 1K rear panel JP5530 2/3K rear panel JP5530 1K rear panel JP5530 2K/3K rear panel Note:Other standard output sockets are optional, such as EU,BS,etc;...

  • Page 6: Unpacking Inspection

    JP5530 1-3KVA 3.1 Unpacking Inspection 3.1.1 Open the packing box of UPS and take it out, visually examine the unit for transit damage. 3.1.2 Check against the accessory lists that the accessories of the UPS are present.(table 3-1)。 3.1.3 If the UPS arrives damaged, or there is any missing accessory, please contact the distributor immediately.
  • Page 7 JP5530 1-3KVA diagram：   1-3K input connection 1-3K output connection 2) UPS Output cable connection 1K(S)、2K(S)、3K(S) UPS can use output sockets，place the load socket into UPS output sockets. Total output power shall not exceed 1KVA/1KW、2KVA/2KW、3KVA/3KW (0.8 output P.F can be optional), complete connection is shown as below：...

  • Page 8: Connection Communication Cable

    JP5530 1-3KVA the “＋” terminal of battery，the black wire is connected to the “－ ” terminal of the battery，the green/yellow wire is grounded for protection purpose. 4) Put the battery plug into external battery socket on the UPS rear panel.
  • Page 9 JP5530 1-3KVA     SNMP card:Realization of remote monitoring and management of UPS through Internet 7   ...

  • Page 10: Introduction Of Display Panel

    JP5530 1-3KVA 4.1 Introduction of display panel 1#-5# LED picture(1) 1# Utility power indicator: when there is utility power, it is green 2# Bypass Indicator: UPS supply power to load via bypass, it is orange 3# Battery indicator: mains abnormal, batteries provide power, it is orange...
  • Page 11 JP5530 1-3KVA Load capacity diagram is shown as below: There are five black squares from left to right side, and the corresponding load capacity is increasing when the squares light one by one. Battery capacity diagram is shown as below: There are five black squares from left to right side, and the corresponding battery capacity is decreasing when the squares are eliminated one by one.

  • Page 12: Turn On/Shut Off Ups

    JP5530 1-3KVA Turning on and completely powering down the UPS Note:  The battery is fully charged before delivery. However, storage and transportation will inevitably cause some charge loss. Therefore, it is advisable to charge the battery for 10 hours before using it, so as to ensure adequate battery autonomy.
  • Page 13 JP5530 1-3KVA the battery indicator is turned on instead. Battery indicator will flash, mains indicator power off, battery will provide power to the load. （Battery mode） In battery mode, buzzer will beep every 4 seconds. Shut off UPS Press button for more than 1 second, UPS will shut off.

  • Page 14: Battery Maintenance

    JP5530 1-3KVA there is no output from UPS. (Note: only when UPS overloads or have failure, UPS switches inverter into bypass 5.1 Battery Maintenance. The battery is key component of the UPS. The battery life depends on the ambient temperature, charge and discharge times. High ambient temperature and deep discharge will shorten the battery life.
  • Page 15 JP5530 1-3KVA 5.2.1 Check the operation status of UPS If the main voltage is normal, UPS should operate in normal mode; if the main voltage is abnormal, UPS should operate in battery mode. In both cases, there should be no fault indication.

  • Page 16: Error Code Of On Lcd & Trouble Shooting

    JP5530 1-3KVA 6.1 Error Code on LCD & Trouble shooting  E1： fan fault E2： can not recognize the model E3： power board fault E4： address of the module is the same E5： don’t meet the requirement of starting UPS E6：...
  • Page 17 JP5530 1-3KVA Troubleshooting In the event of an UPS fault, shoot the trouble according to Table 6-1. If the fault persists, seek immediate assistance from the local distributor customer service office. S/N. Fault conditions Possible cause Actions to take The button holding time is not...

  • Page 18: Specification

    JP5530 1-3KVA 7.1 Specification 16   ...

Table of Contents