Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Cleanmate S 970
Summary of Contents for Cleanmate S 970
- Page 1 Cleanmate Robotic Vacuum Cleaner Cleanmate S 970 USER MANUAL...
-
Page 2: Table Of Contents
Contents Safety Instructions Product Feature User Friendly Design Washable Dust Bin Product Components Main Body and Accessories Main Body Diagram Dust Bin / Rolling Brush Kit Charging Docking / Remote Control Product Operation Touch Panel Operation Battery Charging Starting Up/ Standby/ Sleeping Schedule Cleaning Modes Rolling brush and microfiber installation... -
Page 3: Safety Instructions
Before using this product, please read the safety instructions and follow all regular safety precautions. Warranty service is not applicable to any damage caused by violation of instructions. S 970 sweeping robot is a sophisticated product which is restricted for indoor cleaning only. DO NOT use the robot for non-cleaning purpose. - Page 4 Safety Instructions Safety Instructions of Product, Charging dock, virtual wall, power adapter and other accessories. Warning Only authorized technicians can disassemble the product. Users are not allowed to disassemble, repair or modify the product. Otherwise it may cause electric shock, malfunction and leading to injuries.
- Page 5 Never use the product in an environment with volatile substances to avoid possibility of fire and danger. Prohibited This product is a sophisticated machine for indoor use only. Only use the product indoors DO NOT leave the product to children without supervision. Otherwise it may cause injury.
- Page 6 Safety Instructions Turn the power switch to off when you don’t need to use this product for a long time. Battery leakage may cause fire, injury or pollution to enviroment. Cut off power source when unplugging the power adapter and disconnect the plug from Turn off the power the charging socket.
- Page 7 Unplug when you are not using the product to avoid short circuit. Do not dissemble the battery, otherwise, it may cause leakage, overheating and No Disassembling explosion. Do not keep necklaces, hairpins and other metal materials together with this product during transportation. Prohibited Do not throw the battery into a fire or heat the battery.
- Page 8 Safety Instructions Warning Do not keep necklaces, hairpins and other metal materials together with this product during transportation. Prohibited Do not charge this battery on other devices. This chargeable battery is designed for this robot cleaner only. Prohibited Do not put the battery back to main body or charge it if there is deformation, swelling and/or electrolyte leakage from battery case.
-
Page 9: Product Feature
Product Feature Cleanmate S 970 is an automatic cleaning robot, it has a common sweeping function, double side brush, strong vacuum power, and also a rolling brush kit. It can determine how best to work in order to make it more efficient in cleaning the floor. -
Page 10: Product Components
Product Components Main Body and Accessories Item Description Quantity Main Body Charging Docking Power Adapter Remote Control (no battery inside) Side Brush Mop Cloth HEPA Filter Cleaning Brush User Manual Dust Bin Magnetic Strip... -
Page 11: Main Body Diagram
Main Body Diagram Touch Panel Top Panel Anti-collision Strip Dust Bin Bumper Water Tank Power Switch Rolling Brush Cover Plate Rolling Brush Left Side Brush Auto-Charging Pole Left Wheel Front Wheel Bottom Cover Right Side Brush Battery Cover Right Wheel Charging Socket Dust Bin... -
Page 12: Dust Bin / Rolling Brush Kit
Dust Bin Press Button Dustbin Upper HEPA-filter Cover Primary Filter Dustbin Lower Cover Rolling Brush Kit Dustbin Lower Cover Rolling Brush Bushing A Rolling Brush Stick Rolling Brush Insert Axis Rolling Brush Bushing B Oil Bearing Axis Bushing... -
Page 13: Charging Docking / Remote Control
Charging Docking Docking Top Cover Docking Middle Cover Charging Poles Power Socket Remote Control 1. LED display 2. HOME: Auto-recharging 3. Direction Buttons: control robot move to certain direction. (Only works when robot in standby status) 4. Max: robot change to powerful cleaning mode. (Only works when robot in standby status) 5. -
Page 14: Product Operation
Product Operation Touch Panel Operation Cleaning Operation A. Press to start the robot, and press again to enter auto cleaning mode. B. Make the robot change from Sleeping status to Standby; or press over 3 second make the robot change from Standby to Sleeping status. C. -
Page 15: Battery Charging
Battery Charging 1. Battery Charging Place charging station against the wall, and remove obstacles about 1m at two sides and 2m in front of the station as show in the right figure. Note: If the robot is powered off, then switch on the robot first before charging. -
Page 16: Starting Up/ Standby/ Sleeping
In Order to Extend Battery’s Life: A. Please charge the robot up to 12 hours before first use. B. Charge the robot as soon as possible when battery capacity is low C. The robot will return to the charging docking automatically when accomplish cleaning or battery capacity is low. -
Page 17: Schedule
Schedule You can schedule the robot to make it start cleaning automatically at a certain time every day. 1. Make schedule setting by LED display on robot body A. robot system time setting (make sure the robot in Standby or Power on status) a. - Page 18 3. Set up scheduling via the Cleanmate app Scheduling can also be set in the Cleanmate app. There you can set a weekly schedule and choose any time on any weekday. The scheduled time will continue until you delete it in the app.
-
Page 19: Cleaning Modes
You can set the schedule cleaning time according to your personal request. 4. MAX-cleaning Press “MAX” on the remote control to enter powerful cleaning mode, The Cleanmate increases the vacuum power. Product Operation Rolling brush kit, dust bin kit should be well installed (refer to below diagram) -
Page 20: Rolling Brush And Microfiber Installation
Rolling brush and micro fiber installation Step 2: install rolling brush cover Rolling Brush Cover Step 1: Put in rolling brush Rolling Brush Micro fiber Robot main body Step 3: install the micro fiber mop onto the water tank, and make it flat... -
Page 21: Watertank And Dust Bin Installation
Water Tank and Dust Bin Installation Step 4: open the rubber cap of the electronically controlled water tank, put in the water and close the cap Pump Electronically controlled water tank Step 5: close the rubber cap well and wipe the water on electronic sheet. -
Page 22: Product Maintenance
Product Maintenance Step 2: Install rolling brush cover plate Rolling brush cover plate Step 1: Put in rolling brush Rolling brush Robot main body Dust bin Step 3: Install the dust bin into the spacing. -
Page 23: Cleaning Side Brush
Every other month if it is used 3-4 days per week iii. Every four months if used less than once per week. New filters can be bought at www.cleanmate.se or at your local retailer. A. Hold the bottom of dust bin, and then press down the button B. -
Page 24: Cleaning Dust Bin And Filters
Product Maintenance Cleaning Side Brush 1, check if side brush is broken or something is stuck underneath 2, pull the sidebrush straight up and remove dust and fibers 3, if a side brush is curly or deformed, please replace it Cleaning 2-in-1 Dust Bin and Filters Empty and clean dust bin every time when you use it, cleaning steps as below: Wash the nylon primary filter after every cleaning session (not the HEPA-filter) -
Page 25: Cleaning Sensors And Wheels
Cleaning Sensors and Wheels Use cleaning tools or a soft micro fiber to wipe the sensors and wheels as below: Cleaning Charging Poles Use cleaning tools or a soft micro fibers to wipe charging poles of charging docking and robot as below: Use a dry micro filber to wipe poles if the connection is not well. -
Page 26: Product Specification
Product Specification Classification Item Details Diameter 330 mm Mechanical Height 80 mm Specifications Weight 2,3 Kg Voltage 14,6V Electrical Specifications Battery 2600mAH Li-Ion Dust Bin Capacity 0.5 L Recharge System Manual charge / auto recharge Function Cleaning Mode Auto/ Max/ Mode/ Zig-Zag/Plan Specifications Charging Time About 300 minuter... -
Page 27: Battery Removal
Battery 1. Remove the screws on battery cover with a screw driver. 2. Remove the battery cover. 3. Unplug the wire connector that links the battery and robot. 4. Install battery inside the battery house, make sure the side printed words upside 5. -
Page 28: Trouble Shooting
Trouble Shooting Cause Item Error Code During charging, the power off Charging power voltage low or auto-recharge fail Left side anti-fall error Right side anti-fall error Front side anti-fall error Left wheel fall error Right wheel fall error Front wheel lift up Left side bumper switch error Right side bumper switch error Front side bumper switch error... -
Page 29: Customer Support & Warranty
Cleanmate Customer support & Warranty Do you have questions regarding your Cleanmate product? Please contact us at www.cleanmate.se For service & warranty issues Visit www.cleanmate.se Welcome!
Need help?
Do you have a question about the S 970 and is the answer not in the manual?
Questions and answers