4. Thread the quick-disconnect hose assembly (1)
(48109944) onto the quick-disconnect drain fitting (2)
(48103849).
5. Allow the oil to drain completely from the crankcase.
6. Remove the receptacle, with the used oil, from under
the machine.
7. Remove the quick-disconnect hose assembly (1)
(48109944) from the quick-disconnect drain fitting (2)
(48103849).
8. Install the cap (1) (47786509) onto the quick-discon-
nect drain fitting (2) (48103849).
NOTE: Make sure the o-ring is installed on the drain fitting
(2), if it is damaged, then replace with new.
NOTE: The cap (1) is only hand tight on the drain fitting (2).
Engine - Engine and crankcase
48068128 29/01/2018
10.1 [10.001] / 5
3
RAPH17SSL0170QA
4
RAPH17SSL0170QA
5
RAPH17SSL0169QA