Heating - GBC Explorer 107 Operation & Maintenance Manual

Operations
Raising the rollers
INFORMATION
When raising the main roller, the heat
platen and the Top Teflon roller ( upper
heat assembly ) moves as well.
a) Turn the roller handle counterclockwise to
raise the roller.
Pull roller handle
Main roller handle
Page 5 - 16
Raise
Explorer 107 Operation and Maintenance Manual

5.3.4 Heating

When heating the Teflon rollers and the nip
rollers, it is recommended that the rollers turn
slowly during the heat up process. This allows the
heat to evenly distrubute through out the rollers.
The heat platens heat quicker than the
rollers. With the rollers slowly turning, the platens
assist the rollers during the heating process resulting
in a faster heat up time.
Keep hands and fingers away from
the heating components and the nip
Y o u m a y b e C R U S H E D o r B U R N E D !
The heating components of the Explorer 107
can exceed temperatures of 200
temperatures severe burn can occur if contacted.
a) Clear the area around the laminating rollers
and pull rollers nip.
b) Ensure the laminator is plugged in and no
E-STOP is depressed.
© GBC Pro - Tech December 1999
WARNING
of the rollers.
o F ( 93 o C ), at these