Positioning Your Appliance; Connecting The Appliance - Acova 40005902 Instructions For Use Manual

EN
To ensure your system is safe (see figure
- ensure that the bottom of the junction box is positio-
ned at least 10 cm above the floor;
- ensure that an area of at least 50 cm in front of the
appliance is clear of objects which might hinder air
circulation (furniture, chairs, etc.);
- position a shelf at least 10 cm above the top of your
radiator;
- use mounting screws suitable for your wall.
IMPORTANT This radiator should never be installed
with the control unit positioned topside. (see figure
②
ATTENTION
Always turn off the electricity supply (circuit-
breaker + pilot wire) before making any connections.
22
):
①
)
②
①
40005902 40005902
IMPORTANT The system must be fitted with an omni-
polar circuit-breaker with a minimum contact opening of
3mm.

2.2 Positioning your appliance

To get the most out of your appliance and enjoy the highest standards of
comfort, we recommend that you install the appliance near places with high heat loss
(windows, doors, etc.) wherever possible.
You will find a complete set of assembly instructions in your appliance's box.
IMPORTANT Use wedges during installa-
tion to prevent the control unit from touching
the floor. (see figure )
③

2.3 Connecting the appliance

The technical specifications of your radiator are shown on its nameplate.
Please note these down before installing it and before requesting any after-
sales assistance.
ATTENTION NE PAS COUVRIR IP 34
ACOVA
230V ~ XXXXW
XXXX–XXX–XXX
OF: XXXXXXXXXX XXXXXX
N CONSTRUCTEUR XXXXXX
When connecting the appliance to the mains, you must observe:
• the voltage indicated on the nameplate;
• conventional colour coding:
– blue or grey: neutral
– brown: live
– black: pilot wire
③
IP: protection level of your appliance against the
ingress of solid foreign bodies and water spray
Voltage and power required for installation
Appliance reference number
Class II: double insulated
OF: serial number
Manufacturer code
EN
23