Sideguards - Sunrise Medical Quickie Krypton R Directions For Use Manual

Sideguards

Central support
Installation: Slide the arm post into the receiver, located on the
wheelchair frame, until it stops
Height adjustment:
Slide the armrest post out of the receiver.
Adjust the position of the height adjustment bracket (1) by
removing the screw (2) and moving it to the desired position.
Re-fit the screw and tighten it.
Slide the arm rest post back into the receiver, (Fig. 4.22).
Armpad Position:
The armpad position can be adjusted by releasing the screws
(3), then moving the arm pad to the desired position. Re-tighten
the screws, (Fig. 4.22).
Adjusting Armrest Receiver
The tightness of the armrest receiver can be adjusted
(tightened/loosened) by means of the 2 screws (1) - (Fig. 4.23).
Parts key
1. Outer armpost
2. Height Release Lever
3. Release lever
Fig. 4.22
Fig. 4.23
3
1
1
2
16 Krypton R Rev.D