Rear (6700-D #6 or 7 Only)
A. Remove both lock nuts and upper link plate. Re-
move upper link and rollers from the lift arm and cylin-
der clevis (Fig. 52).
B. Remove retaining ring from the cylinder cap end
pin. Remove cylinder pin with remaining retaining
ring from the frame and cylinder clevis (Fig. 52).
C. Install in reverse order. Use a drop of medium
strength thread locking compound to secure the lock
nuts.
Reelmaster 6500-D/6700-D
6
5
3
1. Lock Nut
2. Upper Link Plate
3. Upper Link
4. Roller
Page 4 - 81
2
7
8
Figure 52
5. Retaining Ring
6. Cylinder Cap End Pin
7. Lift Arm
8. Lower Link Plate
Hydraulic System
4
1
8