Starkey Hearing Technologies Remote Quick Tips

Starkey Hearing
Technologies
Remote
Pairing
Starkey Hearing Technologies Remote must be paired to interact with Livio
®
once, then the hearing aids and remote will automatically recognize each other. The Remote can be paired within Inspire
or outside of Inspire. Livio AI and Livio hearing aids can only be paired with one remote.
Pairing within Inspire
1 Launch Inspire, connect and detect hearing aids.
Select "Accessories" on the left navigation bar.
2
3 Ensure the Lock switch is in the unlock (left) position.
4 Place the hearing aids within 12 inches of the Remote.
Place the Remote in pairing mode by pressing the Home
5
button for 5 seconds. Both LEDs will rapidly blink.
6
Select "Pair" to put the hearing aids into pairing mode
Pairing is successful when the remote image displays on the
7
accessory screen .
B
Use the drop-down menu below the remote image to set
8
"Favorite Button Configuration"
9 Select the information icon for pairing instructions if needed
Volume Down
.
A
.
C
Volume Up
Mute
AI and Livio hearing aids. Pairing occurs
™
A
B
C
.
D
Ear Selection
Switch
Memory change
Favorite
Home
Lock
D
®