Cable Routing And Connection; How To Use; Calling - Depaepe Telecom Securphone IP User Manual

SecurPhone IP – User Guide
2.3. Cable routing and connection
To improve the protection against humidity and bad weather :
- drill the cable(s) holes a slightly thinner dimension than the
diameter of the cable itself.
- bend the cable downwards to let the water and humidity run
Passe-câble / Rubber
outside of the case.
cap
Paroi de l'appareil
Housing surface
Cases come out of factory with pre drilled holes to ensure proper
!
ventilation. Do not fill those holes.
3. How to use it
3.1. Calling
Hook-off the handset in order to pick up the line:
1) If your SecurPhone IP has a front panel keypad, then dial the number. To send the
call, press # key or wait for 4 sec. (no key entry time out is default value, you can
change it).
2) If your SecurPhone IP has memory buttons, press a button and the phone will dial
one programmed number (once the unit has been configured, see §4.7 Memory
storing p 36).
Intérieur/Inside
Câble / Cable
Bon/Correct
Extérieur/Outside
Intérieur/Inside
Extérieur/Outside
Mauvais/Wrong
30