Advertisement
Quick Links
Hobart Six Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
C
B
long
bolt
locking
dowel
screw x 10
x48
nut x 48
x20
G
H
L + R
L + R
handle
slide rail
slide rail
x 6
x12
x12
Hardware Supplied
Phillips & Flathead screwdrivers and hammer required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
mocka.co.nz | mocka.com.au
F
E
D
medium
small
screw x 30
screw x48
I
K
J
long
shelf
screw x1
plug x1
WARNING: Any furniture that is not anchored to a wall has the potential
W
to tip over in certain circumstances, i.e. if a child attempts to climb up on
the furniture or in the event of an earthquake. Accordingly, we
recommend that all furniture is anchored to a wall. We supply a free
safety wall anchor with all furniture sold and we recommend these are
used to prevent your product tipping. The fixing device provided should
fit most wall types, but please note that different wall materials
safety
long
may require different fixing devices from those supplied.
strap
screw
x1
x1
X
Y
wall
screw
anchor
x1
x1
Z
washer
x1
1
Advertisement
Related Manuals for Mocka Hobart Six Drawer
Summary of Contents for Mocka Hobart Six Drawer
- Page 1 Hobart Six Drawer Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
- Page 2 Hobart Six Drawer Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Attach 3 x left slide rail (G) to panel [3] and secure with 6 x small screw (E). Attach 3 x right slide rail (G) to panel [4] and secure with 6 x small screw (E).
- Page 3 Hobart Six Drawer Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Attach 3 x left slide rail (G) and 3 x right slide rail (G) to panel [5] and secure Insert 4 x dowel (C) into panel [6]. Attach panels [6] to panels [4] and [5] with 12 x small screws (E).
- Page 4 Hobart Six Drawer Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Insert 6 x dowels (C) into panels [3], [4] and [5] .Attach panels [3], Insert 4 x dowel (C) into panel [6]. Attach panel [6] to panels [3] and [5] [4], [5] and [7] to panel [2] and secure with 10 x long screws (D).
- Page 5 Hobart Six Drawer Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Attach 1 x long screw (K) to centre support (J) as shown. Firmly screw Slide panels [9] and [10] between the grooves on panels [3] and [4] and [7] 4 legs [8] to the base of panel [2].
- Page 6 Hobart Six Drawer Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Drawers (x6) Insert 6 x dowels (C) into panel [1]. Attach panel [1] to panels [3] ,[4] and [7] Insert 24 x bolts (A) into panel [11] .Attach panels [12] and [13] to panel [11] secure with 24 xlocking nuts (B).
- Page 7 Hobart Six Drawer Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Drawers (x6) Drawers (x6) Insert 6 x bolts (A) into panel [11] .Slide panels [15] between the grooves on panels [12] and [13] to form the base of the drawer as shown.
- Page 8 Hobart Six Drawer Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Drawers (x6) Strap Washer wall anchor wall screw wall screw Once assembled lift furniture into place, do not drag. Use a drill to create a small hole lining up with the top of the safety strap (W).
Need help?
Do you have a question about the Hobart Six Drawer and is the answer not in the manual?
Questions and answers