Mounting The Kombitool; Mounting The Deflector - Stihl FSB-KM Instruction Manual

Mounting the KombiTool

2
1
Push the lug (1) on the drive tube
N
into the slot (2) in the coupling
sleeve as far as stop.
3
4
When correctly installed, the red line (3)
(arrow point) must be flush with the end
of the coupling sleeve.
Tighten down the star knob (4)
N
firmly.
Removing the KombiTool
Reverse the above sequence to
N
remove the drive tube.
FSB-KM

Mounting the Deflector

Fitting the line limiter blade
2
3
Slide the blade (1) into the
N
deflector's guide.
Insert and tighten down the
N
screw (2) with the combination
wrench (3) – supplied with
KombiEngine or available as
special accessory.
Mounting the deflector
2
1
1
Push the clamp (1) over the lug (2)
N
on the deflector and hold it there.
Push the other side of the clamp (1)
N
over the deflector.
English
9