Before Loading The Machine And Before Starting A Programme; Knocking Noises During Reprocessing - Miele A 313 Operating Instructions Manual

en - Areas of application
44
Before loading the machine and before starting a
programme
- Check that fittings such as irrigation sleeves and injector nozzles
are securely screwed into position.
 Make sure that all screw connectors are fitted with injector
nozzles, adapters, irrigation sleeves or blind stoppers to ensure
that all fittings in use are supplied with sufficient standardised
pressure.
Damaged fittings such as injector nozzles, adapters and irrigation
sleeves must not be used.
Fittings not equipped with wash items do not have to be replaced
blind stoppers.
- Check that the baskets and modules are correctly connected to the
water supply.

Knocking noises during reprocessing

If load items are not attached to one or more module nozzles, you
may hear knocking noises during reprocessing. The noises occur
when water jets from the empty injector nozzles hit the top spray arm.
This will not affect the cleaning performance in any way.
Attach load items to all injector nozzles to prevent the knocking

noises from occurring.