Mahlkonig GUATEMALA Instruction Manual page 24

COFFEE GRINDER
Problem Cause
The grinder is • The grinding
humming but
not grinding.
• The grounds
• A foreign
• The burrs are
The grinder is
not grinding
fi nely enough.
• The burrs are
The grinder • The start but-
does not
grind con-
nuously or
the grinding
process stops
intermi ently.
24
Remedy
 Change the grind adjustment se ng to
mechanism is
blocked.
 Release the lock on the grind adjust-
are too fi ne.
 Clean the grinding mechanism as
object is in
the grinding
mechanism.
 Contact your supplier (see "Mainte-
worn out.
 Contact your supplier (see "Mainte-
not aligned
correctly.
 Contact your supplier (see "Mainte-
ton is faulty.
"coarse" and start the grinding process.
The grinder will clear itself.
Then, during opera on, change the
grind adjustment se ng to the desired
grinding degree.
ment se ng and set the grinding
degree to "10".
Start the grinding process.
The grinder will clear itself.
Then, during opera on, change the
grind adjustment se ng to the desired
grinding degree.
described in the "Cleaning" sec on
and remove the foreign object. If the
foreign object cannot be removed, con-
tact your supplier (see "Maintenance
and service" sec on).
nance and service" sec on).
nance and service" sec on).
nance and service" sec on).