Digital Systems TYTAN DS511 User Manual page 21

first, second and third phone number:
phone numbers which will be notified in the even of alarm trigger, numbers in
international format, '+' at the beginning, for example +CCCXXXXXXXXXX,
(where CCC is the international country code, e.g. +7, +81 or +359),
p1
parameter enabling SMS forwarding - any SMS received by DS511 will be
resent on the first mobile phone number,
t1, t2, t3
parameters for voice call notification for given number, '1' enables voice call
notification, '0' disables voice call notification,
s1, s2, s3
parameters for SMS notification for given number, '1' enables SMS
notification, '0' disables SMS notification,
m1, m2, m3
parameter for activating or deactivating the operation with mobile
application TytanGPS, '1' enables application, '0' disables application,
important – if this parameter is set to '1' the SMS notification (accordingly s1, s2
or s3) must be also set to '1' in order to the application TytanGPS to run properly.
DS511 sends a return SMS to confirm:
DSPIN set: {new DSPIN} number of mobile phones:
{number of mobile phones}
{first phone number} resend:{yes/no} call:{yes/no}
sms:{yes/no} app:{yes/no},
{second phone number} call:{yes/no} sms:{yes/no}
app:{yes/no},
{third phone number} call:{yes/no} sms:{yes/no}
app:{yes/no}
e.g.:
12345 setgsm 54321 54321 3 +44501123456 1 1 1 0
+44502123456 0 1 0 +44503123456 0 1 1
Above example sets new DSPIN to 54321 and 3 mobile phone numbers. These
numbers will be notified after the alarm trigger. First mobile phone number will
be notified by voice call and SMS, second number just by SMS, third number by
SMS and operation via mobile application TytanGPS.
The DS511 confirms change of the settings by return SMS:
DSPIN set: 54321 number of mobile phones:3
+44501123456 resend:yes call:yes sms:yes app:no,
+44502123456 call:no sms:yes ap:no,
+44503123456 call:no sms:yes ap:yes
READING PHONE NUMBERS AND GSM SIGNALISATION MODE
Command allows to check mobile phone numbers and GSM configuration
saved in the device:
{DSPIN} readgsm
e.g.:
12345 readgsm
Sends SMS with information analogous to setgsm, that is:
GSM config:
DSPIN: {DSPIN} number of mobile phones:
{number of mobile phones}
{first phone number} resend:{yes/no} call:{yes/no}
sms:{yes/no} app:{yes/no},
{second phone number} call:{yes/no} sms:{yes/no} app:{yes/no},
{third phone number} call:{yes/no} sms:{yes/no} app:{yes/no}
21
ds511 PAGER