IKEA LIVSGNISTA Manual page 18

ENGLISH
- At this stage, light up the burners and turn
the knobs from max position
position to check flame stability.
Upon completion of adjustment, reseal
the work surface using sealing wax or an
equivalent material.
NL
REFERENCE TO LOCAL REGULATIONS
Ensure that the installation and gas
connections are performed by a qualified
technician, following the manufaturer's
instructions and in compliance with current
local safety regulations.
KNOBS REPLACEMENT
Be sure that your hob is switched-off.
All knobs must be in closed position.
Pull upwards each knob of the cooktop and
store together after removal.
Take the kit with new knobs, which is located
in upper part of packaging and remove the
to minimum
new knobs from the plastic bag.
Push each of knob on the valve shaft until
you feel the end of sliding (sparking may
occur).
Make sure that all the knobs are in the right
position.
Verify correct installation by switching each
burner separately.
18