Table of Contents
Advertisement
TRUEWIRELESS STEREO MODE
If you have two 43248 speakers, you can connect them together to form a stereo pair for
true stereo audio playback by performing the following steps.
1.
Ensure that neither speaker is connected to a Bluetooth® device and that both
speakers are powered off.
2.
Power on both speakers, then momentarily press the Bluetooth Button to initiate
TrueWireless™ Stereo Mode pairing. Once pairing is complete, an audible tone
will be heard and the Bluetooth LED on the master (left) speaker will blink white,
while the Bluetooth LED on the slave (right) speaker will illuminate solid blue.
3.
Open the Bluetooth settings on your mobile device and scan for nearby
Bluetooth devices.
4.
Locate and select the MP43248 entry. If prompted for a passcode, enter 0000
(four zeros). Once your device is connected, the Bluetooth LED on the master
(left) speaker changes to solid white and an audible tone can be heard.
5.
While TrueWireless Stereo Mode is active, restart both speakers to exit
TrueWireless Stereo Mode.
Note that when in TrueWireless Stereo Mode, the 3.5mm Audio Jack on the slave (right)
speaker is inactive. Use the jack on the master (left) speaker for a physical connection.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
or through email by sending a message to tech@monoprice.com. Check the website for
support times and links.
To download the latest drivers, firmware, manuals, etc., go to www.monoprice.com and
type the P/N into the search bar. If available, support files are linked at the bottom of the
product page.
7
Advertisement
Table of Contents
