2.3.2 Mounting The Device To A Panel - Siemens SIMATIC NET RUGGEDCOM RS900GF Installation Manual

Installing the Device
2.3.2 Mounting the Device to a Panel
Removing the Device
To remove the device from a DIN rail, do the following:
1.
2.
3.
2.3.2 Mounting the Device to a Panel
For panel installations, the RUGGEDCOM RS900GF can be equipped with panel
adapters that allow the device to be attached to a panel using screws.
8
Insert a flathead screwdriver into the slot of the sliding release and move it
down.
1
DIN Rail
1
DIN Rail Adapter
2
Figure 2.2 Removing the Device from a DIN Rail
Swing the bottom of the device away from the DIN rail.
Lift the device off the DIN rail.
2
Installation Manual, 01/2021, C79000-G8976-1352-05
3
1
2
1
RUGGEDCOM RS900GF