Inserting And Removing Connecting Cable Plug; Switching The Trimmer On/Off - Stihl FSA 130 R Instruction Manual

8 Inserting and Removing Connecting Cable Plug

► Connect the carrying ring (2) to the carabi‐
ner (1).
► Wait for the trimmer to stop swinging.
► Check position of cutting attachment. If it
needs adjustment:
3
► Loosen the screw (3).
► Move carrying ring (2) up or down the drive
tube until correct balanced position is reached.
► Tighten down the screw (3) firmly.
7.5 Adjusting the Loop Handle
The loop handle can be set to different positions
to suit the height and reach of the user.
► Switch off the trimmer and pull the connecting
cable plug out of the socket.
► Loosen the screws (2).
► Move the loop handle (1) to the required posi‐
tion and make sure that:
– The spacer sleeve (3) fits between the loop
handle (1) and carrying ring.
– If you are using a mowing head: a = no
more than 30 cm
– If you are using a metal cutting attachment:
a = no more than 25 cm
► Tighten down the screws (2) so that the loop
handle cannot be rotated on the drive tube.
0458-725-9621-C
1
2
2
1
a
2
3
8 Inserting and Removing
Connecting Cable Plug
8.1 Inserting the Connecting Cable
Plug
► Hold connecting cable plug (2) so that the
arrow on its side lines up with the arrow on the
socket (1).
► Insert the connecting cable plug (2) in the
socket (1).
The plug (2) engages in position.
8.2 Removing the Connecting
Cable Plug
► Grip the connecting cable plug (2) with your
hand.
► Pull the plug (2) out of the socket (1).
9 Switching the Trimmer
On/Off
9.1 Switching On
► Hold the trimmer with your right hand on the
control handle – wrap your thumb around the
control handle.
► Hold the trimmer with the other hand on the
loop handle - wrap your thumb around the
loop handle.
English
1
2
1
2
37