Fujitsu ADUH09LUAS1 Service Manual page 148

¢ DIP switch setting
• SW101-Switch 1: Drainage function setting
Switch 1
• SW101-Switch 2: Auto louver grille setting
→hen Auto louver grille kit (optional parts) is attached, set to "Enabled".
Switch 2
• SW101-Switch 3: Fan delay setting
→hen the indoor unit is stopped while operating in conjunction with auxiliary heater, the indoor
unit fan operation will continue for 1 minute.
Switch 3
1-1. Function settings on indoor unit
ON
OFF
Auto louver grille setting
ON
OFF
ON
OFF
Drainage function
Disabled
Enabled
Enabled
Disabled
Fan delay
Enabled
Disabled
- (05-2) -
Factory setting
♦
Factory setting
♦
Factory setting
♦
1. Function settings