Table of Contents
Advertisement
12.38
Checking the frame
12.39
Checking the link fork
12.40
Checking the throttle cable routing
SERVICE WORK ON THE CHASSIS 12
–
Check the frame for damage, cracking, and deformation.
»
If the frame shows signs of damage, cracking, or defor-
mation:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
F00255-01
–
Check the link fork for damage, cracking, and deformation.
»
If the link fork exhibits damage, cracking, or deformation:
–
Change the link fork.
401520-01
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. (
–
Remove the right side cover. (
–
Remove the fuel tank.
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed, side by side, on the
back of the handlebars and above the fuel tank bracket,
to the throttle valve body. Both throttle cables must be
secured behind the rubber strap of the fuel tank support.
»
If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
F03561-01
Info
Always replace a damaged link fork. Repair of
the link fork is not authorized by Husqvarna
Motorcycles.
p. 69)
p. 67)
p. 71)
(
p. 76)
85
Advertisement
Table of Contents
