Checking For Chain Dirt Accumulation - Husqvarna FE 450 2022 Owner's Manual

12.33

Checking for chain dirt accumulation

SERVICE WORK ON THE CHASSIS 12
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
H03705-11
–
Plug in connector
–
Remove the wash cap set.
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
F03551-11
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray (
–
Join quick release coupling
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
Finishing work
–
Install the right side cover. (
–
Mount the seat. (
–
Install the air filter box cover. (
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. (
400678-01
2
.
M6 10 Nm (7.4 lbf ft)
3
for the fuel pump.
p. 156)
4
.
p. 72)
p. 68)
p. 69)
p. 80)
79