Setting The Bow Offset; Digital Selective Calling; Networked Chartplotter And Vhf Radio Functionality; Turning On Dsc - Garmin GPSMAP 84 Series Owner's Manual

Setting the Bow Offset

Based on the installation angle, the trolling motor may not align with the center line of your boat. For the best
results, you should set the bow offset.
1 Adjust the angle of the trolling motor
forward.
2 From the trolling motor bar, select

Networked Chartplotter and VHF Radio Functionality

If you have a NMEA 0183 VHF radio or a NMEA 2000 VHF radio connected to your chartplotter, these features
are enabled.
• The chartplotter can transfer your GPS position to your radio. If your radio is capable, GPS position
information is transmitted with DSC calls.
• The chartplotter can receive digital selective calling (DSC) distress and position information from the radio.
• The chartplotter can track the positions of vessels sending position reports.
If you have a Garmin NMEA 2000 VHF radio connected to your chartplotter, these features are also enabled.
• The chartplotter allows you to quickly set up and send individual routine call details to your Garmin VHF
radio.
• When you initiate a man-overboard distress call from your radio, the chartplotter shows the man-overboard
screen and prompts you to navigate to the man-overboard point.
• When you initiate a man-overboard distress call from your chartplotter, the radio shows the Distress Call
page to initiate a man-overboard distress call.

Turning On DSC

Select Settings > Other Vessels > DSC.
112
so it aligns with the center line of your boat
> Calibrate > Bow Offset.

Digital Selective Calling

, pointing straight
Digital Selective Calling