Adaptive Cruise Control
■ Restoring the previously set vehicle speed
The previously set vehicle speed is stored in memory. To restore that vehicle speed, press
the RES/SET switch to the "RES/+" side.
display area.
• The vehicle speed stored in memory is erased in the following circumstances:
- The cruise control is turned off by pressing the
- The Vehicle Dynamics Control or the Traction Control Function is activated.
- The cruise control mode was switched from Adaptive Cruise Control to Con-
ventional Cruise Control.
• If there is no vehicle speed stored in the memory (previous vehicle speed),
the current vehicle speed is set when the RES/SET switch is pressed to the
"RES/+" side.
Page 52
66
S03442
NOTE
(SET indicator) is displayed on the EyeSight
SET
indicator
(CRUISE) switch.
MPG
MPH
miles
S03993