■ Restoring the previously set vehicle speed
The previously set vehicle speed is stored in memory. To restore that vehicle speed, press
the RES/SET switch to the "RES/+" side.
display area.
You can restore the set vehicle speed when the previously set vehicle speed has been
stored and the current vehicle speed is approximately 20 mph (30 km/h) or more.
• The vehicle speed stored in memory is erased in the following circumstances:
- The cruise control is turned off by pressing the
- The Vehicle Dynamics Control or the Traction Control Function is activated.
- The cruise control mode was switched from Conventional Cruise Control to
Adaptive Cruise Control.
• The vehicle drives constantly and correspondingly to the set vehicle speed
between 20 mph (30 km/h) and 90 mph (145 km/h)*.
*: For Mexico models, 30 km/h and 200 km/h.
• If there is no vehicle speed stored in the memory (previous vehicle speed),
the current vehicle speed is set when the RES/SET switch is pressed to the
"RES/+" side.
Page 100
S03442
NOTE
Conventional Cruise Control
(SET indicator) is displayed on the EyeSight
MPG
(CRUISE) switch.
MPH
miles
S02235
107