Table of Contents
Advertisement
■ Decreasing the set vehicle speed
●
Using the RES/SET switch
• Push to the "SET/-" side briefly.
Every time the switch is pushed, the set
vehicle speed will decrease to the next 5
mph (5 km/h) decrement.
• Push to the "SET/-" side continuously.
While the switch is being pushed, the set
vehicle speed will decrease in decrements
of 1 mph (1 km/h).
When operating the switch, the set vehicle
speed changes on the combination meter dis-
play.
●
Using the brake pedal
1. Depress the brake pedal to decrease the vehicle speed. Conventional Cruise Control will
be canceled and
2. When the desired speed is reached, press the RES/SET switch to the "SET/-" side. The
speed at the time of pressing the switch will be set as the new set vehicle speed, and it
appears on the EyeSight display area.
■ Accelerating temporarily
Depress the accelerator pedal to accelerate temporarily.
When the accelerator pedal is released, the vehicle returns to the set vehicle speed.
When the accelerator pedal is depressed while the Sport Sharp (S#) mode of
SI-DRIVE is selected, the display of the shift indicator may switch from
selected gear position.
(SET indicator) will be turned off.
NOTE
Conventional Cruise Control
S03443
to the
D
103
Advertisement
Table of Contents
