Table of Contents
Advertisement
●
Automatic cancellation by the system
In the following cases, a notification sounds 1
short beep and 1 long beep and the cruise
control function is automatically canceled.
(OFF indicator) is displayed on the
EyeSight display area. After the conditions
listed below have been resolved, perform the
cruise control set operation again to reactivate
cruise control.
• The select lever is moved to a position
D
other than
.
- Conventional Cruise Control can be
resumed after the select lever is returned to the
• A paddle shift switch is operated while driving when the select lever is in the
- Conventional Cruise Control can be resumed after the shift indicator returns to
• Vehicle speed drops to approximately 16 mph (25 km/h) or less (due to a steep uphill
grade or some other reason).
• Vehicle Dynamics Control is in the OFF mode.
- Conventional Cruise Control can be resumed after Vehicle Dynamics Control has been
switched to the normal mode or traction mode.
• Vehicle speed increases to approximately 100 mph (160 km/h)* or more.
*: For Mexico models, 220 km/h.
• The Vehicle Dynamics Control or the Traction Control Function is activated.
• Any door (except the trunk) is opened.
• The driver's seatbelt is unfastened.
• The electronic parking brake is engaged.
• The EyeSight system has a malfunction.
Page 111
• The steering wheel is turned significantly in either direction.
• The grade of the road is steep.
• The Pre-Collision secondary braking is activated.
Do not use Conventional Cruise Control on slippery roads. Doing so may result
in an accident.
WARNING
Conventional Cruise Control
OFF is
displayed.
D
position.
(EyeSight Warning indicator: Yellow)
MPG
MPH
miles
S04003
D
position.
D
.
105
Advertisement
Table of Contents
