Setting Up The Monitor; Connecting The Stand - Dell SE2422H User Manual

Setting up the monitor

Connecting the stand

NOTE: The stand riser and stand base are detached when the monitor is
shipped from the factory.
NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the setup instructions that were
included with the stand.
CAUTION: Place monitor of a flat, clean, and soft surface to avoid
scratching the display panel.
To attach the monitor stand:
1. Align the tabs on the stand base with the slots on the stand riser.
2. Insert the stand riser on the stand base firmly.
Setting up the monitor | 25