Dell SE2422H Disassembly

1
DELL SE2422H
1. Disassembly Procedures:
S1
Open the Pizza carton with a proper tool.
Take out all of the
cable, power cable, CD&user's manual, stand base,
S2
stand riser and EEI label from the carton. (Note: It
depends on whether users returning the accessories)
label and QSG
cover
riser
base
Take out of the paper top with base, riser and cover
S3
from the carton, then take out the monitor from the
EPE bag and put it on a protective cushion.
accessories including QSG,
power cable
HDMI cable
user's manual
Use a Philips-head screwdriver to remove 6pcs
screws for unlocking mechanisms.
S4
(No.1~4 screw size=M4x11; Torque=11 1kgfxcm;
No.5~6 screw size=M4x6; Torque=11 1kgfxcm)
HDMI
Turn over the LCD monitor to let the screen faced
up, place a cloth on the panel where you are working
on to protect the panel. Continually, wedge your
S5
fingers between the front bezel and the panel in
order of arrow preference for unlocking
mechanisms. Turn over the LCD monitor to let the
screen faced down and then remove the rear cover.
2
Disconnect the function key cable away from the
S6
connector of the board, then tear off 3pcs adhesive
tape for releasing the function key board.
±
±
2
3
4
1
5
6
3
2
1