Back View - Dell SE2422H User Manual

Back view

1
2
2
3
4
4
Label Description
1 VESA mounting holes (100 mm x
100 mm-behind the VESA cover)
2 Regulatory label
3 Stand release button
4 Barcode, serial number, and Service
Tag label
5 Cable-management slot
6 VESA cover
10 | About your monitor
6
Use
Wall mount the monitor using VESA-
compatible wall mount kit (100 mm x 100
mm).
NOTE: Wall mount kit is not shipped with
your monitor and is sold separately.
Lists the regulatory approvals.
Releases stand from the monitor.
The Service Tag is a unique alphanumeric
identifier that enables Dell service
technicians to identify the hardware
components in your monitor and access
warranty information. Refer to this label
if you need to contact Dell for technical
support.
Connect the cables by inserting them
through the slot.
The two endpoints on the front of the
VESA cover are aligned with the VESA
mounting holes and the VESA cover is
gently pressed .
6
5