Use Of Qualified Personnel; Warranty And Liability; Disposal; For Your Safety - Pilz PNOZ X9 Operating Manual

PNOZ X9

Use of qualified personnel

The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
It is the company's responsibility only to employ personnel who
Are familiar with the basic regulations concerning health and safety / accident preven-
}
tion,
Have read and understood the information provided in the section entitled Safety
}
Have a good knowledge of the generic and specialist standards applicable to the spe-
}
cific application.

Warranty and liability

All claims to warranty and liability will be rendered invalid if
The product was used contrary to the purpose for which it is intended,
}
Damage can be attributed to not having followed the guidelines in the manual,
}
Operating personnel are not suitably qualified,
}
Any type of modification has been made (e.g. exchanging components on the PCB
}
boards, soldering work etc.).

Disposal

In safety-related applications, please comply with the mission time T
}
lated characteristic data.
When decommissioning, please comply with local regulations regarding the disposal of
}
electronic devices (e.g. Electrical and Electronic Equipment Act).

For your safety

The unit meets all the necessary conditions for safe operation. However, please note the
following:
Note for overvoltage category III: If voltages higher than low voltage (>50 VAC or >120
}
VDC) are present on the unit, connected control elements and sensors must have a
rated insulation voltage of at least 250 V.
Operating Manual PNOZ X9
19526-EN-09
in the safety-re-
M
6