Step 3; Step 4 - modway EEI-3939 Quick Start Manual

EEI-3939/ EEI-3940/ EEI-3941

STEP 3:

1. Carefully put Top (5) on the assembled Base from the Step 1 by two adults as shown. Set Top (5) on the
Base's at the back and leave about 5mm distance from the edge for all other three sides.
2. Make sure the Top (5) fits closely and pour Sealant (Not provided) for the sealing as shown.

STEP 4:

1. Put 6 pieces of Rubber Suckers (C) on the pre-installed Clips of the Metal Frame Sides (1) as shown.
2.
Put 1 piece of Glass (6) on the Rubber Suckers (C) with your hand as shown.
Page 3 of 4
Customer Service 609-256-9000︱www.modway.com