Universal Battery Kit Installation
Pasture Vac Instructions
Your Universal Battery Box (Item #1) will need to be assembled before installing the Universal Battery Kit P#(A2326).
First, make sure your bolt holes on each tab are aligned with the holes on the base body. Then secure the tabs to the
body by using (4) 1/4"-20 x 1/2" HHCS (Item #2) and (4) 1/4"-20 Ny-Flange Lock Nuts (Item #3) on each tab. Refer to
Figure A below.
It is recommended to use an Impact Wrench along with a 3/8" Socket to secure each 1/4"-20 x 1/2" HWHTCS.
Figure A
Figure B
Fully Assembled
Universal Battery Kit
P#(A2326)
24