Universal Battery Kit Installation - Peco ESTATE Series Operator's Manual

Universal Battery Kit Installation

Pasture Vac Instructions
Your Universal Battery Box (Item #1) will need to be assembled before installing the Universal Battery Kit P#(A2326).
First, make sure your screw holes on each tab are aligned with the holes of the base part. Then, using a 1/4"-20 x 1/2"
Slotted Hex Washer Head Thread Cutting Screw (Item #2), screw in the sheet metal screw to secure each tab. Do this
to all (4) tabs. Refer to Figure A below.
It is recommended to use an Impact Wrench along with a 3/8" Socket to secure each 1/4"-20 x 1/2" HWHTCS.
Figure A
Figure B
Fully Assembled
Universal Battery Kit
P#(A2326)
24