T Ips; Onthly ) - Kaivac NO-TOUCH CLEANING 1200 Series Operator's & Parts Manual

4.4 t
RoUbLeshooting
• Poor Vacuum Pickup
1. Check Squeegee Blades. If blades are worn or damaged, replace Squeegee Head.
2. Clean float cage.
3. Check for leaks in the Vacuum Hose or Gasket.
4. Check for clogged Vacuum Hose.
5. Check to see if float ball was tripped.
• Vacuum Shuts Off Prematurely
1. Check Float Cage; clean if dirty.
2. Cleaning Chemicals may be producing too much foam. Use correct Chemicals.
• Other Issues? Contact Technical Support
Phone:
United States and Canada: 1-800-287-1136
International: 1-513-887-4600
Email:
info@kaivac.com
For Technical Support Contact Form go to:
and choose Technical Support tab.
4.5 R
epLACeMent
The following tasks should be performed monthly to keep your system operating at peak performance.
REPLACE IF WORN
Check for worn squeegee blades.
Worn blades cause streaking and
loss of vacuum suction.
P a g e ǀ 2 5
t
ips
https://www.kaivac.com/contactus.php
(M )
onthLy
kaivac
cleaning
systems
4.0 Troubleshooting and Upkeep
Unscrew cuff at end
of Vac Wand, remove
old head and replace
with new every 6-8
weeks for optimal
performance.
©2020 Kaivac, Inc. All Rights Reserved
TM
www.kaivac.com