Ask a qualified electrician or service person to check the outlet grounding if you are unsure. Do not modify the plug provided with the KaiVac. If it will not fit the outlet, have a properly grounded outlet installed by a qualified electrician.
Page 7
• These placards show proper cleaning procedures and safety precautions. Prevention of Water Damage to Buildings The KaiVac is to be used on water resistant building surfaces only. These include concrete, terrazzo, ceramic tile and quarry tile. The KaiVac may be used for stripping on vinyl composite tile floors, but daily cleaning of resilient flooring using the KaiVac is not recommended.
Page 12
Hepa Filter Replacement Instructions Slide Hepa (C) cover off of stud to remove. Remove wingnut (A) and washer (B) from Hepa Cover as shown above. Remove threaded rod/wingnut (D) combination to Remove the Filter Keeper (E) free the Filter Keeper. Remove Hepa filter (F) and Repeat the steps in reverse to replace.
Need help?
Do you have a question about the 2100 Series and is the answer not in the manual?
Questions and answers