Extreme Networks Extreme Management Center NMS-A-305 Installation Manual page 29

1. Press the power button, and then press F6 to go to the Boot Menu.
2. Select the USB drive on the menu.
3. The engine starts booting from the USB flash drive.
4. When the boot is complete, the Engine Installation screen appears and the
installation begins.
Method 2:
1. Press the power button, and then press F2 to go to the BIOS setup.
2. Use the arrow keys to navigate to the Boot Options menu.
3. Ensure that the USB flash drive is listed as Boot Option #1 at the top.
4. Save changes and exit.
5. The engine starts booting from the USB flash drive.
6. When the boot is complete, the Engine Installation screen appears and the
installation begins.
9. After the installation completes, reboot the engine and remove the USB flash drive.
10. Proceed to Configuration, and follow the instructions for configuring the engine.
Upgrading Extreme Management Center Engine Software
29 of 34