Download Print this page

Ilda / Computer Control - Laserworld Club Series Manual

Hide thumbs Also See for Club Series:

Advertisement

Available languages

Available languages

The sensitivity can be adjusted between 1 and 100. Standard value is 50.

8.2.6. ILDA / COMPUTER CONTROL

The laser can be used with any laser control software that sup-
ports the ILDA control signal via sub-d connector. Use an ILDA
cable to connect the Digital Analog Converter (DAC / ILDA
interface) of the laser software to the ILDA in port at the laser.
Grating Effects Settings in ILDA mode
To operate the grating effects in ILDA mode the „ILdA" menu must be selected. Press „Enter" to
change the settings.
The standard selection is „L001", which means that the laser will automatically switch through the
grating effects. A certain grating effect can be selected with L002, L003, L004. If L005 is selected
there is no grating effect.
Use the „Up" / „Down" button to change the selection:
Recommended computer control software for your laser:
Showeditor Set with ShowNET
www.showeditor.com
Showcontroller Set with ShowNET
www.showcontroller.com
14 / 46
Laserworld Club Series
Laserworld Club Series
Final statement
Laserworld products are tested and product packaging is inspected before leaving our warehouse.
Users must to follow the local safety regulations and warnings within this manual and adhereto
any regulations within its place of use. Damages through inappropriate use will void any liability or
warranty of our products.
Due to continual product developments, please check for the latest update of this product manual
at www.laserworld.com. If you do have any further questions, then please contact your dealer/place
of purchase or use our contact section on our website.
For service issues, please contact your dealer/place of purchase and ensure only genuine Laser-
world spare parts are used in any service repairs.
Errors and omissions excepted and products are subject to change.
Laserworld (Switzerland) AG
Kreuzlingerstrasse 5
8574 Lengwil / SWITZERLAND
Registered office:
8574 Lengwil / Switzerland
Company number: CH-440.3.020.548-6
Commercial Registry Kanton Thurgau
CEO: Martin Werner
VAT no. (Switzerland): 683 180
UID (Switzerland): CHE-113.954.889
VAT no. (Germany): DE 258030001
WEEE-Reg.-No. (Germany): DE 90759352
www.laserworld.com
info@laserworld.com
representative according to EMVG:
Ray Technologies GmbH
Managing Director: Martin Werner
Mühlbachweg 2
83626 Valley / Germany
15 / 46

Advertisement

loading

This manual is also suitable for:

Cs-2000rgb fxCs-4000rgb fx