MPPT solar charger manual
3.10. Voltage sensing
An optional
Smart Battery Sense
or
battery monitor
measures the battery terminal voltage and sends this via Bluetooth using the
VE.Smart [26]
network to the solar charger. If the battery voltage is less than the solar charge voltage, the solar charger will
increase its charge voltage to compensate for voltage losses.
3.11. Remote on/off
A virtual remote on/off terminal can be created by using the
VE.Direct non inverting remote on/off
cable. The functionality can be
programmed using the VictronConnect App RX port function settings.
3.12. WireBox
The optional MPPT WireBox is a plastic cover that can be attached to the bottom of the solar charger. It covers the battery and
solar terminals, preventing accidental or inquisitive contact with the battery and PV terminals. It provides an extra level of safety,
and is particularly useful if the solar charger is installed in a general access area.
For more information and to find the right MPPT WireBox for your solar charger see the MPPT WireBox product page:
•
MPPT WireBox-Tr
Example of a solar charger with MPPT WireBox
Page 8
Features