Insertion Systems - CanadianSolar CS3U-P Installation Manual

Standard solar modules
Hide thumbs Also See for CS3U-P:
Table of Contents

Advertisement

6.3 INSERTION SYSTEMS

 This mounting method has been certified by VDE and
CSA, or qualified by Canadian Solar.
 Insertion methods can vary and depend on the
mounting structures. The installer needs to follow the
mounting guidelines recommended by the mounting
system supplier. Each module must be securely
maintained through all its length on two opposite sides.
Install and tighten the insertion profiles to the support
structure using the hardware and instructions provided
by the mounting system manufacturer. The system
designer and installer are solely responsible for load
calculations and for the proper design of support
structure.
 Canadian Solar warranty may be void in cases where
improper insertion systems or unsuitable installation
methods are found. When installing insertion profiles,
please take the following measures into account:
Insertion Method A
Two insertion profiles run parallel to
long side frame.
Installation Method
Module Types
CS3U/CS6U
CS3K/CS6K/CS6V/CS1V/CS1VL
CS6A/CS6VL
CS1K/CS1H
CS3W
CS3L
CS1Y
CS3N
EN-Rev IM/GN-AM-EN/2.71 Copyright © June, 2021. CSI Solar Co., Ltd.
1. Do not bend the module frame.
2. Do not touch the front glass or cast shadow onto it.
3. Do not damage the surface of the frame.
4. Ensure that the insertion profiles overlap the module
5. Ensure that the module frame (C-shape) overlaps the
6. Ensure insertion profile thickness and tolerances suit
Insertion Method B
Two insertion profiles run
perpendicularly to long side frame.
Insertion Method A
+5400Pa/-2400Pa
+4000Pa/-2400Pa
+4000Pa/-2400Pa
+2400Pa/-2400Pa
/
/
+5400Pa/-2400Pa
/
frame by at least 10 mm (0.39 in).
insertion profiles by at least 15 mm (0.59 in).
module thickness.
Insertion Method C
An additional support bar used with
clamps
Insertion Method B
+1400Pa/-1400Pa
+2000Pa/-2000Pa
+2400Pa/-2400Pa
/
+1200Pa/-1200Pa
+2200Pa/-2200Pa
+1800Pa/-1800Pa
+1600Pa/-1600Pa
| 22
Insertion Method C
+5400Pa/-2400Pa
+5400Pa/-2400Pa
+5400Pa/-2400Pa
+5400Pa/-2400Pa
/
/
/
/
www.csisolar.com

Advertisement

Table of Contents
loading

Table of Contents