Solid-State Drive - HP EliteBook x360 1040 G8 Maintenance And Service Manual

3. Remove the battery (3) from the computer.
To install the battery, reverse the removal procedures.

Solid-state drive

To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-3 Solid-state drive descriptions and part numbers
Description
512 GB + 32 GB Optane memory
512 GB, self-encrypting (SED), TLC
512 GB, value
256 GB, TLC, value
256 GB, self-encrypting (SED), TLC
128 GB, TLC
Solid-State Drive Support Kit (includes shielding and thermal pad)
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board the battery (see
Remove the solid-state drive:
1. Remove the solid-state drive from the system board.
NOTE:
38 Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
The solid-state drive shield is not available as a spare part.
Preparation for disassembly on page
35).
Spare part number
L85366-001
L85368-001
L85364-001
L85354-001
M07245-001
M06792-001
M16055-001
35).
Battery on page 36).