Preparation For Ignition (Handling); Choice Of Fire Lighter - Invicta ARATOS P649000 Manual

Preparation for ignition (handling)

For first use, or after a stoppage due to the complete draining of the hopper:

The feed screw is empty: it will take some time to fill it, and then feed into the crucible.
To load the feed screw. Press button C for 5 seconds and wait until the filling cycle is complete (duration = 5 minutes).
If you notice that pellets fall into the crucible before the end of the cycle: press on button C for 5 seconds
It is only possible to move on to the ignition phase after this initial loading of pellets.
Note: This phase is not necessary if the stove has been previously turned off manually

Choice of fire lighter:

We recommend using natural "shredded wood plug" firelighters (see photo below). These plugs are suitable for
lighting pellets, they ignite much more rapidly than other firelighters (such as those made from compressed wood,
white cubes or gel).
XD, on 17/02/2020
ARATOS Plug-in
stove
dual
Page 24 sur
model P649000
41